Laptop 13 in screen mockup

Laptop 13 in: what to know

A 13 in laptop mockup is the usual way to show a website, online store or dashboard on a hero banner, a pitch deck or a launch post.

• Capture the page without the browser bar at full resolution, then crop to 16 by 10.
• Set the lid angle to about 105 to 115 degrees for a natural look; turn the 3D view slightly for depth.
• Put your logo on the lid design if you show the laptop from behind or closed.

Parts of a laptop

A laptop mockup is the usual way to show a website, SaaS dashboard or online store on a hero banner or in a pitch. The studio model is a generic laptop in 13 in, 14 in and 15 in sizes with a lid you can open from closed to 135 degrees. Your screenshot goes on the screen and a second design can go on the lid for a sticker or skin idea. It is a presentation mockup of a still screen, not a working device.

Screen

The front print area inside the lid. Your website or app screenshot goes here.

Bezel

The border around the screen. It is part of the model.

Lid

The back of the screen, the second print area. Use it for a skin, sticker or logo.

Base and keyboard

The lower half, in the finish you pick. Set the lid angle to show more or less of it.

How to size it

1. Pick the model: 13 in, 14 in or 15 in, and set the lid angle (about 100 to 115 degrees looks natural).
2. Most laptop screens today are 16 by 10 (for example 1920 x 1200 or 2560 x 1600); older and cheaper ones are 16 by 9 (1920 x 1080).
3. Take a full-width screenshot of the page without the browser bar, or crop to the screen shape shown in the Design panel.
4. Upload it to the front face; add a lid design to the back if you want.
5. Export the mockup as PNG or JPG at the size you need.

Materials and finishes

Silver

The classic look; reads well on white and pale websites.

Space grey or black

Frames dark-mode screens and adds contrast on light backgrounds.

Mistakes to avoid

• Including the browser bar, bookmarks and open tabs: it looks untidy and can show private information. Capture the page only.
• A screenshot in the wrong ratio: a 16 by 9 image on a 16 by 10 screen leaves bars or stretches.
• A blurry screenshot from a zoomed-out page: capture at full resolution on a sharp screen.

How to make it in the studio

1. Open it. Press Customise this laptop 13 in. It opens in the 3D studio at 304 x 215 x 11.5 mm.
2. Set the size. In the Size panel, pick a preset or type your own measurements.
3. Add your design. In the Design panel, upload your logo or artwork: it goes on the front first. Pick other faces to add colours, text or images to each.
4. Check it in 3D. Turn the pack around. Switch to the flat print view to see the artwork on the screen.
5. Download. The Download panel gives you the print template first, then mockup images for your store or social posts.
6. Get it made. If you want a quote, send the design to packitmama from the Download panel, and we will reply personally.

Questions