Burger wrap paper 3D mockup

Burger wrap paper mockup and print template

A butter paper at 380 x 275 mm in greaseproof (butter) paper. Change any size, put your artwork on it, see it in 3D and download a print-ready label. Free, in your browser, no account needed.

What you get

Structure
Butter paper
Starting size
Width 380 mm, Height 275 mm. Every size can be changed.
Material
Greaseproof (butter) paper
Downloads
PDF and SVG print template, PNG and JPG mockup images, turntable video, GLB 3D model
Good for
greaseproof paper, sandwich wrap
Accuracy
An approximation of the industry structure: good for concepts and quotes. Have your printer check flaps, glue areas and allowances before production.

Parts of a butter paper

Butter paper (greaseproof paper) wraps burgers, sandwiches, rolls and baked goods, and lines trays and boxes. Printed with a logo or a repeat pattern, it turns a plain wrap into part of the brand, and it is often the first thing a customer touches. The studio shows a loose printed sheet in square and burger-wrap sizes, in greaseproof, kraft or uncoated paper, printed on one or both sides.

Printed face
The side with your design. Most wraps are printed on one side only.
Reverse
The other side. Leave it plain unless your printer prints both sides.
Repeat pattern
A logo or pattern that tiles across the sheet, so it looks right however the sheet is folded round the food.
Edges
Sheets are cut square. There is no fold or glue area.

How to size it

  1. Wrap the actual product in plain paper first and measure the sheet that covers it with a comfortable overlap.
  2. Pick the closest size in the studio, or type your own width and height.
  3. Design a repeat that still reads when the sheet is crumpled or folded: a small logo or a pattern rather than one big central image.
  4. Ask your printer how many colours they print on greaseproof paper; simple one or two colour designs are common.
Common starting sizes
ForSize (L x W x H)
Sandwich or roll wrap250 x 250 mm or 300 x 300 mm (starting points)
Burger wrapabout 380 x 275 mm (a starting point)
Tray or basket linercut to the tray, with a few millimetres to spare

Materials and finishes

Greaseproof paper
Holds back grease and moisture. The usual choice for burgers, fries and pastries.
Kraft paper
A natural brown look for bakeries and dry foods. Check how well it resists grease for oily food.
Uncoated paper
Dry items such as bread and biscuits, or as an outer wrap over a greaseproof layer.

Mistakes to avoid

  • Using ordinary inks for a wrap that touches food: ask your printer for inks and papers made for food contact, and check the food safety rules where you sell.
  • Fine detail and thin text: ink spreads a little on thin paper, so small type fills in.
  • One big centred logo: once the sheet is folded round the food, only a corner of it shows.
  • A sheet that is too small: the food shows at the edges and the wrap does not stay closed.

How to make it in the studio

  1. Open it. Press Customise this burger wrap paper. It opens in the 3D studio at 380 x 275 mm.
  2. Set the size. In the Size panel, pick a preset or type your own measurements.
  3. Add your design. In the Design panel, upload your logo or artwork: it goes on the front first. Pick other faces to add colours, text or images to each.
  4. Check it in 3D. Turn the pack around. Switch to the flat print view to see the artwork on the label.
  5. Download. The Download panel gives you the print template first, then mockup images for your store or social posts.
  6. Get it made. If you want a quote, send the design to packitmama from the Download panel, and we will reply personally.

Questions

Is the mockup see-through like real butter paper?

No. Real greaseproof paper is slightly translucent; the studio shows it opaque, so use the mockup for placement and colour, not for how much shows through.

Can I print on both sides?

Yes, the studio has a front and a back face. Many printers print one side only, so check before you design the back.