Custom packing tape 48 mm 3D mockup

Custom packing tape 48 mm mockup and print template

A packing tape at 200 x 48 mm in white vinyl. Change any size, put your artwork on it, see it in 3D and download a print-ready label. Free, in your browser, no account needed.

What you get

Structure
Packing tape
Starting size
Repeat length 200 mm, Tape width 48 mm. Every size can be changed.
Material
White vinyl
Downloads
PDF and SVG print template, PNG and JPG mockup images, turntable video, GLB 3D model
Good for
branded tape, carton sealing tape
Accuracy
An approximation of the industry structure: good for concepts and quotes. Have your printer check flaps, glue areas and allowances before production.

Parts of a packing tape

Printed packing tape seals every carton and mailer with your logo, so a plain brown box looks like it came from your brand. It is one of the cheapest pieces of branded packaging. The studio shows a roll of tape with one print repeat wound along it and a length run out to the side, in white polypropylene or kraft paper, 36, 48 or 72 mm wide.

Print repeat
The length of design that prints again and again along the tape. You design one repeat.
Tape width
Usually 48 mm for cartons and mailers, 72 mm for heavy or large cartons.
Core
The cardboard tube the tape is wound on. A 76 mm core fits standard tape dispensers.
Adhesive side
The back of the tape. It is not printed.

How to size it

  1. Pick the width your cartons need: 48 mm for most cartons and mailers, 72 mm for large or heavy cartons.
  2. Ask your printer for their repeat length before you design, as it depends on their printing plates, then set the same repeat length in the studio.
  3. Keep the design inside the tape width with a few millimetres clear at each edge, as the edges may not print or may land on the carton edge.
  4. Use bold shapes and short text: the tape crosses the carton seam and gets cut at random points.
Common starting sizes
ForSize (L x W x H)
Standard carton and mailer tape48 mm wide on a 76 mm core
Wide carton tape72 mm wide
Narrow tape36 mm wide

Materials and finishes

Polypropylene (white or clear)
The everyday self-adhesive packing tape. Strong and waterproof; white makes colours bright.
Kraft paper tape
A recyclable look on brown cartons. Water-activated (gummed) kraft tape bonds into the carton fibres and needs a wet dispenser.

Mistakes to avoid

  • Designing a repeat length the printer cannot make: the pattern ends up stretched or cut. Get the repeat length first.
  • Text that reads only one way: once the tape goes on, half the cartons show it upside down. Repeat the logo both ways or keep it symmetric.
  • Thin lines and small text: tape is printed fast and small detail fills in.
  • Light ink on kraft tape: pale colours almost disappear on brown.

How to make it in the studio

  1. Open it. Press Customise this custom packing tape 48 mm. It opens in the 3D studio at 200 x 48 mm.
  2. Set the size. In the Size panel, pick a preset or type your own measurements.
  3. Add your design. In the Design panel, upload your logo or artwork: it goes on the front first. Pick other faces to add colours, text or images to each.
  4. Check it in 3D. Turn the pack around. Switch to the flat print view to see the artwork on the label.
  5. Download. The Download panel gives you the print template first, then mockup images for your store or social posts.
  6. Get it made. If you want a quote, send the design to packitmama from the Download panel, and we will reply personally.

Questions

How long is one repeat?

It depends on the printer, so ask them first. Then type the same length in the studio and design one repeat.

Does it fit my tape dispenser?

Most hand dispensers take a 76 mm core. The studio also shows a 40 mm core for small hand rolls.